|
|
 FAQ
 Search
 Memberlist
 Usergroups
 Register
 Profile
 Private messages
 Log in
|
|
| Author |
Message |
Wallis Short
Guest
|
 Posted: Thu Aug 07, 2003 4:27 pm Post subject: Access 2511 reverse telnet problems |
 |
|
HI All
I was wondering if any of you guys have come across reverse telnet
problems with the 2511 access server?
Basically I have 8 devices connected and when I reverse telnet to them
all is OK, but on when I try and connect to a 2900 XL switch I get
this :
Termserver#telnet 192.168.1.1 2006
Trying 192.168.1.1, 2006 ......Open
And thats it, nothing else. No command prompt or anything comes up on
the screen
I have configured telnet connections as exactly the same as all my
other devices, I have IOS 12.0(5.2).
Any ideas ??
Cheers
Wallis |
|
| Back to top |
|
 |
|
|
Marc Russell
Guest
|
| Posted: Fri Aug 08, 2003 6:26 am Post subject: Re: Access 2511 reverse telnet problems |
|
|
I assume a PC directly attached with Hyperterminal works fine. I can't
rember which but some switches want a straight connection. Take a
RJ45-female to RJ45-female connector and add a console cable to the mix on
this connection and see what happens.
Marc Russell
www.ccbootcamp.com (Cisco Training)
"Wallis Short" <wekshort@yahoo.com> wrote in message
news:ae2ee312.0308070327.73bf8c63@posting.google.com...
| Quote: | HI All
I was wondering if any of you guys have come across reverse telnet
problems with the 2511 access server?
Basically I have 8 devices connected and when I reverse telnet to them
all is OK, but on when I try and connect to a 2900 XL switch I get
this :
Termserver#telnet 192.168.1.1 2006
Trying 192.168.1.1, 2006 ......Open
And thats it, nothing else. No command prompt or anything comes up on
the screen
I have configured telnet connections as exactly the same as all my
other devices, I have IOS 12.0(5.2).
Any ideas ??
Cheers
Wallis |
|
|
| Back to top |
|
|
Hansang Bae
Guest
|
| Posted: Fri Aug 08, 2003 7:17 am Post subject: Re: Access 2511 reverse telnet problems |
|
|
In article <ae2ee312.0308070327.73bf8c63@posting.google.com>,
wekshort@yahoo.com says...
| Quote: | HI All
I was wondering if any of you guys have come across reverse telnet
problems with the 2511 access server?
Basically I have 8 devices connected and when I reverse telnet to them
all is OK, but on when I try and connect to a 2900 XL switch I get
this :
Termserver#telnet 192.168.1.1 2006
Trying 192.168.1.1, 2006 ......Open
And thats it, nothing else. No command prompt or anything comes up on
the screen
I have configured telnet connections as exactly the same as all my
other devices, I have IOS 12.0(5.2).
|
If the configs are exactly the same (no exec, trans input all), then use
a cable from a connection that works (swap the two). This will rule out
the cable as the culprit.
Maybe someone put "no exec" on the switches console port?
--
hsb
"Somehow I imagined this experience would be more rewarding" Calvin
*************** USE ROT13 TO SEE MY EMAIL ADDRESS ****************
********************************************************************
Due to the volume of email that I receive, I may not not be able to
reply to emails sent to my account. Please post a followup instead.
******************************************************************** |
|
| Back to top |
|
|
ec
Guest
|
| Posted: Fri Aug 08, 2003 12:25 pm Post subject: Re: Access 2511 reverse telnet problems |
|
|
"Wallis Short" <wekshort@yahoo.com> wrote in message
news:ae2ee312.0308070327.73bf8c63@posting.google.com...
| Quote: | HI All
I was wondering if any of you guys have come across reverse telnet
problems with the 2511 access server?
Basically I have 8 devices connected and when I reverse telnet to them
all is OK, but on when I try and connect to a 2900 XL switch I get
this :
Termserver#telnet 192.168.1.1 2006
Trying 192.168.1.1, 2006 ......Open
And thats it, nothing else. No command prompt or anything comes up on
the screen
I have configured telnet connections as exactly the same as all my
other devices, I have IOS 12.0(5.2).
Any ideas ??
Cheers
Wallis
|
I know this sounds funny, but hit enter when you see the
"Trying 192.168.1.1, 2006 ......Open "
I bet you'll be greeted with a prompt. |
|
| Back to top |
|
|
teton67
Guest
|
| Posted: Fri Aug 15, 2003 9:30 am Post subject: Re: Access 2511 reverse telnet problems |
|
|
Marc,
I have experienced this issue, I have found that with some of the IOS
switches, by setting the modem DTR-active command on the line I can get them
to work correctly. Unflortunately this command does not work with the IOS
based routers, I usually set the modem host command with routers. I have
found that if I don't set the modem commands the routers logging to the
console can open the port preventing a reverse telnet in.(kind of
frustrating) If someone from Cisco could explain why the consoles behave
differently between the switches and routers, I'd appreciate it.
robert
"Marc Russell" <mrussell@ccbootcamp.com> wrote in message
news:avydnaxk5fggZq-iU-KYgw@comcast.com...
| Quote: | I assume a PC directly attached with Hyperterminal works fine. I can't
rember which but some switches want a straight connection. Take a
RJ45-female to RJ45-female connector and add a console cable to the mix on
this connection and see what happens.
Marc Russell
www.ccbootcamp.com (Cisco Training)
"Wallis Short" <wekshort@yahoo.com> wrote in message
news:ae2ee312.0308070327.73bf8c63@posting.google.com...
HI All
I was wondering if any of you guys have come across reverse telnet
problems with the 2511 access server?
Basically I have 8 devices connected and when I reverse telnet to them
all is OK, but on when I try and connect to a 2900 XL switch I get
this :
Termserver#telnet 192.168.1.1 2006
Trying 192.168.1.1, 2006 ......Open
And thats it, nothing else. No command prompt or anything comes up on
the screen
I have configured telnet connections as exactly the same as all my
other devices, I have IOS 12.0(5.2).
Any ideas ??
Cheers
Wallis
|
|
|
| Back to top |
|
|
|
|
