|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Private messages
Log in
|
|
| Author |
Message |
Guest
|
Posted: Wed Apr 19, 2006 10:07 pm Post subject: WebVPN missing on Cisco PIX 515 7.1.2? |
|
|
I'm running Cisco PIX 515 7.1.2 software, but i cannot enable web vpn,
what is wrong?
thank in advance,
Antonio
Cisco PIX Security Appliance Software Version 7.1(2)
Device Manager Version 5.1(2)
Compiled on Tue 14-Mar-06 17:00 by dalecki
System image file is "flash:/image.bin"
Config file at boot was "startup-config"
01-gw up 11 days 6 hours
Hardware: PIX-515E, 128 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0xfff00000, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
Encryption hardware device : VAC+ (Crypto5823 revision 0x1)
0: Ext: Ethernet0 : address is 0011.2094.1dfd, irq 10
1: Ext: Ethernet1 : address is 0011.2094.1dff, irq 11
2: Ext: Ethernet2 : address is 000d.88ee.b394, irq 11
3: Ext: Ethernet3 : address is 000d.88ee.b395, irq 10
4: Ext: Ethernet4 : address is 000d.88ee.b396, irq 9
5: Ext: Ethernet5 : address is 000d.88ee.b397, irq 5
Licensed features for this platform:
Maximum Physical Interfaces : 6
Maximum VLANs : 25
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : Unlimited
This platform has an Unrestricted (UR) license.
Serial Number: xxxxxx
Running Activation Key: xxxxxxxxxxxxxxxxxx
Configuration last modified by enable_15 at 19:17:27.161 CEDT Wed Apr
19 2006
01-gw(config)# webvpn
^
ERROR: % Invalid input detected at '^' marker.
01-gw(config)# |
|
| Back to top |
|
 |
|
|
Erik Tamminga Guest
|
Posted: Sun Apr 23, 2006 10:35 am Post subject: Re: WebVPN missing on Cisco PIX 515 7.1.2? |
|
|
Hi,
To my knowledge WebVPN is only supported on the ASA series. I know they seem
share the same OS base but they do certainly not share the same feature
base.
Erik
<sysalt@gmail.com> wrote in message
news:1145468416.251543.186520@u72g2000cwu.googlegroups.com...
| Quote: | I'm running Cisco PIX 515 7.1.2 software, but i cannot enable web vpn,
what is wrong?
thank in advance,
Antonio
Cisco PIX Security Appliance Software Version 7.1(2)
Device Manager Version 5.1(2)
Compiled on Tue 14-Mar-06 17:00 by dalecki
System image file is "flash:/image.bin"
Config file at boot was "startup-config"
01-gw up 11 days 6 hours
Hardware: PIX-515E, 128 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0xfff00000, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
Encryption hardware device : VAC+ (Crypto5823 revision 0x1)
0: Ext: Ethernet0 : address is 0011.2094.1dfd, irq 10
1: Ext: Ethernet1 : address is 0011.2094.1dff, irq 11
2: Ext: Ethernet2 : address is 000d.88ee.b394, irq 11
3: Ext: Ethernet3 : address is 000d.88ee.b395, irq 10
4: Ext: Ethernet4 : address is 000d.88ee.b396, irq 9
5: Ext: Ethernet5 : address is 000d.88ee.b397, irq 5
Licensed features for this platform:
Maximum Physical Interfaces : 6
Maximum VLANs : 25
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : Unlimited
This platform has an Unrestricted (UR) license.
Serial Number: xxxxxx
Running Activation Key: xxxxxxxxxxxxxxxxxx
Configuration last modified by enable_15 at 19:17:27.161 CEDT Wed Apr
19 2006
01-gw(config)# webvpn
^
ERROR: % Invalid input detected at '^' marker.
01-gw(config)#
|
|
|
| Back to top |
|
 |
|
|