|
|
| Author |
Message |
deep
Guest
|
 Posted: Sat Apr 22, 2006 11:23 am Post subject: pix 506 E config |
 |
|
Hi,
i have to config the Pix Firewall for just internet access
now i am running my internet directly to public ip's but now with PIX
506E.
Plz gime me wht config i have to do in my pix as well as wht change i
will have to do in my Router that is connected to internet through E1
line.
My current config of PIx is as
PIX Version 6.3(4)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname PIX12tL
domain-name shyam.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 59.144.164.33 255.255.255.0
ip address inside 172.16.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 0.0.0.0 0.0.0.0 0 0
static (inside,outside) 59.144.164.40 172.16.2.2 netmask
255.255.255.255 0 0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225
1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 202.78.168.118 255.255.255.255 outside
http 172.16.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet 172.16.1.0 255.255.255.0 inside
telnet timeout 5
ssh 202.78.168.118 255.255.255.255 outside
route outside 0.0.0.0 0.0.0.0 59.144.164.1 1
route inside 172.16.2.0 255.255.255.224 172.16.1.5 1
route inside 172.16.3.0 255.255.255.224 172.16.1.5 1
route inside 172.16.4.0 255.255.255.224 172.16.1.5 1
ssh timeout 5
console timeout 0
username shyam password ZyD6kufF3mkoCa8R encrypted privilege 2
terminal width 80
Cryptochecksum:15a136f7cd824c5631dcb1438936b338
: end |
|
| Back to top |
|
 |
|
|
Walter Roberson
Guest
|
| Posted: Sat Apr 22, 2006 6:19 pm Post subject: Re: pix 506 E config |
|
|
In article <1145690580.638911.173260@j33g2000cwa.googlegroups.com>,
deep <deepakdkgarg@gmail.com> wrote:
| Quote: | i have to config the Pix Firewall for just internet access
now i am running my internet directly to public ip's but now with PIX
506E.
Plz gime me wht config i have to do in my pix as well as wht change i
will have to do in my Router that is connected to internet through E1
line.
|
I'm sorry, could you restate the problem? What is the difference
between what you have now and the state you want?
| Quote: | My current config of PIx is as
PIX Version 6.3(4)
ip address outside 59.144.164.33 255.255.255.0
ip address inside 172.16.1.1 255.255.255.0
global (outside) 1 interface
nat (inside) 0 0.0.0.0 0.0.0.0 0 0
static (inside,outside) 59.144.164.40 172.16.2.2 netmask 255.255.255.255 0 0
route inside 172.16.2.0 255.255.255.224 172.16.1.5 1
route inside 172.16.3.0 255.255.255.224 172.16.1.5 1
route inside 172.16.4.0 255.255.255.224 172.16.1.5 1
|
Currently, you have internal networks
172.16.1.0-255,
172.16.2.0-31,
172.16.3.0-31,
172.16.4.0-31
and you have an internal router at 172.16.1.5 .
Currently all of your traffic goes out through the public IP 59.144.164.33
except for 172.16.2.2, which goes out as 59.144.164.40 .
You do not allow any incoming connections from outside to inside.
What is the new configuration that you would like? |
|
| Back to top |
|
|
NETADMIN
Guest
|
| Posted: Sat Apr 22, 2006 6:25 pm Post subject: Re: pix 506 E config |
|
|
HI deep,
Canyou post some clear ind\formationof the situation.
And in your config followinag parts are wringplease correct this:
| Quote: | global (outside) 1 interface
nat (inside) 0 0.0.0.0 0.0.0.0 0 0
|
It should be :
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
If you cangive me diagrammay be i can help
Rgrds....
CK-NET |
|
| Back to top |
|
|
Hemat Maheshwari
Guest
|
| Posted: Sun Apr 23, 2006 12:53 am Post subject: Re: pix 506 E config |
|
|
Its not much clear from the given info ... but shud be as
ip address outside "public Ip"
ip address inside "ip of inside netwrok"
route outside 0.0.0.0 0.0.0.0 "Public IP" 1
route inside 172.16.2.0 255.255.255.224 172.16.1.5 1
route inside 172.16.3.0 255.255.255.224 172.16.1.5 1
route inside 172.16.4.0 255.255.255.224 172.16.1.5 1
global (outside) 1 interface |
|
| Back to top |
|
|
Walter Roberson
Guest
|
| Posted: Sun Apr 23, 2006 4:00 am Post subject: Re: pix 506 E config |
|
|
In article <1145739201.568965.75860@u72g2000cwu.googlegroups.com>,
Hemat Maheshwari <hemat.maheshwari@gmail.com> wrote:
| Quote: | Its not much clear from the given info ... but shud be as
ip address outside "public Ip"
ip address inside "ip of inside netwrok"
route outside 0.0.0.0 0.0.0.0 "Public IP" 1
|
Better is
route outside 0.0.0.0 0.0.0.0 "Router IP" 1
| Quote: | route inside 172.16.2.0 255.255.255.224 172.16.1.5 1
route inside 172.16.3.0 255.255.255.224 172.16.1.5 1
route inside 172.16.4.0 255.255.255.224 172.16.1.5 1
global (outside) 1 interface
|
nat (inside) 1 0.0.0.0 0.0.0.0 |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Private messages
Log in
