|
|
 FAQ
 Search
 Memberlist
 Usergroups
 Register
 Profile
 Private messages
 Log in
|
|
| Author |
Message |
DuaneO
Guest
|
 Posted: Tue Apr 25, 2006 1:22 am Post subject: what does "sh controllers ethernet-controller g1/0/1 phy" sh |
 |
|
Hi,
I'm wondering if anyone knows how to interpret the output of: "sh
controllers ethernet-controller g1/0/1 phy"? I'm trying to figure out
what capabilities my server is advertising. The output below is from a
3750G-24TS.
Thankx,
--Duane
Switch#sh controllers ethernet-controller g1/0/1 phy
GigabitEthernet1/0/1 (gpn: 1, port-number: 1)
-----------------------------------------------------------
0000: 1140 Control Register : 0001 0001 0100
0000
0001: 796D Control STATUS : 0111 1001 0110
1101
0002: 0141 Phy ID 1 : 0000 0001 0100
0001
0003: 0C28 Phy ID 2 : 0000 1100 0010
1000
0004: 01E1 Auto-Negotiation Advertisement : 0000 0001 1110
0001
0005: CDE1 Auto-Negotiation Link Partner : 1100 1101 1110
0001
0006: 000D Auto-Negotiation Expansion Reg : 0000 0000 0000
1101
0007: 2001 Next Page Transmit Register : 0010 0000 0000
0001
0008: 4562 Link Partner Next page Registe : 0100 0101 0110
0010
0009: 0E00 1000BASE-T Control Register : 0000 1110 0000
0000
000A: 7800 1000BASE-T Status Register : 0111 1000 0000
0000
000F: 3000 Extended Status Register : 0011 0000 0000
0000
0010: 0078 PHY Specific Control Register : 0000 0000 0111
1000
0011: AC40 PHY Specific Status Register : 1010 1100 0100
0000
0012: 0000 Interrupt Enable : 0000 0000 0000
0000
0013: 0000 Interrupt Status : 0000 0000 0000
0000
0014: 0CE0 Extended PHY Specific Control : 0000 1100 1110
0000
0015: 0000 Receive Error Counter : 0000 0000 0000
0000
0016: 0000 Reserved Register 1 : 0000 0000 0000
0000
0017: 0000 Global Status : 0000 0000 0000
0000
0018: 4100 LED Control : 0100 0001 0000
0000
0019: 082A Manual LED Override : 0000 1000 0010
1010
001A: 000A Extended PHY Specific Control : 0000 0000 0000
1010
001C: 0000 Page select Register : 0000 0000 0000
0000
001D: 000C Disable Receiver 1 : 0000 0000 0000
1100
001E: FF00 Disable Receiver 2 : 1111 1111 0000
0000
001B: 848B Extended PHY Specific Status : 1000 0100 1000
1011
Auto-MDIX : On [AdminState=1
Flags=0x00052248]
Switch# |
|
| Back to top |
|
 |
|
|
ciscodagama@gmail.com
Guest
|
| Posted: Tue Apr 25, 2006 11:50 pm Post subject: Re: what does "sh controllers ethernet-controller g1/0/1 phy |
|
|
This command seems to be dumping register values and without the data
sheet for the PHY used in this system, you won't be able to parse this
data.
If you can somehow find out what kind of PHY is being used for the GE
interface and discover that it is an off-the-shelf PHY rather than a
Cisco proprietary PHY then you may be able to make some progress. You
could, for instance, look in the web for a data sheet for that part or
maybe request one from the vendor of that part and then check out the
register listing in the data sheet with the definitions for the bits in
the registers and get the information you need that way.
Cisco da Gama
http://ciscostudy.blogspot.com |
|
| Back to top |
|
|
|
|
