t1000
Joined: 12 May 2007
Posts: 12
|
 Posted: Mon Jun 11, 2007 4:09 pm Post subject: overlaps message |
 |
|
When I try the configuration below on a 2600 router I always receive the “overlaps” message. Please help me!
Router(config)#interface serial 0/0
Router(config-if)#ip address 192.168.6.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#clock rate 56000
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.6.2 255.255.255.0
I always get the message: "192.168.6.0 overlaps with Serial0/0"
WHY????
I can use 192.168.6.0, but not 192.168.5.0, 192.168.4.0 etc.
Should the subnet masks be different, if serial 0/0 is 6.1 and fastethernet 0/0 is 6.2?? How; serial 255.255.0.0 ? Fastethernet 255.255.255.0?? |
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Private messages
Log in
