cisco
Guest
|
 Posted: Tue Jul 10, 2007 2:32 am Post subject: static routing question |
 |
|
Hi: I've only ever configured 1-1 NAT on Cisco Pix.
I have a new subnet with one IP on the outside interface routing through a
PIX 506e with a 192.168.0.x subnet on the inside interface.
There is also a VPN with an IP Pool in the 10.10.10.1 range
The inside interface now has a webserver on it that needs to be accessed
over https from the outside.
What's the correct way to set this up? I tried to add a static route from
the 192.168.0.x server to outside, but when I tried to save it, I got an
alert that it conflicted with "global IP Pool 1".
Also, I had https enabled on the outside interface for remote management of
the PIX...that would have to be disabled for this to work I guess?
-- |
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Private messages
Log in
