setting up address translation rule in PDM

cisco · Guest

Hi: I posted the "static routing question" but probably didn't give enough
information.

I'm trying to add an Address Translation Rule to take https traffic from the
outside IF and route it to a specific IP on the inside interface, using the
PDM 3.0 on a Pix 506e.

I specify the original host/network as:

IF: inside
IP address: 192.168.0.100
Mask: 255.255.255.255

and set "translate address on interface" to:

IF: Outside
Static IP Address: Interface IP
"Redirect Port" is checked
TCP is checked
Original Port: 443
Translated Port: 443

When I click "OK" I get a popup "Overlaping/Redundant translation rule"
"This static port mapping translation rule is overlapping with a dynamic
address translation for inside: 0.0.0.0/0.0.0.0(any) uing global pool 1. Do
you still wish to proceed?"

"global pool 1" is a VPN pool

I click "stop" at this point for fear of mucking something up...what do I
need to do to set this up correctly?