|
|
 FAQ
 Search
 Memberlist
 Usergroups
 Register
 Profile
 Private messages
 Log in
|
|
| Author |
Message |
dt1649651@yahoo.com
Guest
|
 Posted: Tue Jul 24, 2007 7:18 am Post subject: 2811 and built-in fa / vlan |
 |
|
How do I asign a vlan to the built-in fa 0/0 or fa0/1 of the 2811 ?
Currently I can only assign VLANs to the HWIC 4FE module on this
router with the switchport command, but the fa0/0 and fa 0/1 does not
understand the switchport command.
Thanks for your advice,
DT |
|
| Back to top |
|
 |
|
|
James
Guest
|
| Posted: Tue Jul 24, 2007 8:35 am Post subject: Re: 2811 and built-in fa / vlan |
|
|
On 24 Jul, 10:18, "dt1649...@yahoo.com" <dt1649...@yahoo.com> wrote:
| Quote: | How do I asign a vlan to the built-in fa 0/0 or fa0/1 of the 2811 ?
Currently I can only assign VLANs to the HWIC 4FE module on this
router with the switchport command, but the fa0/0 and fa 0/1 does not
understand the switchport command.
Thanks for your advice,
DT
|
You can't as these are layer 3 Interfaces, however they can be used to
create 802.1q trunks to other switches.
James |
|
| Back to top |
|
|
dt1649651@yahoo.com
Guest
|
| Posted: Tue Jul 24, 2007 10:08 am Post subject: Re: 2811 and built-in fa / vlan |
|
|
On Jul 23, 8:35 pm, James <jdbal...@hotmail.com> wrote:
| Quote: | On 24 Jul, 10:18, "dt1649...@yahoo.com" <dt1649...@yahoo.com> wrote:
How do I asign a vlan to the built-in fa 0/0 or fa0/1 of the 2811 ?
Currently I can only assign VLANs to the HWIC 4FE module on this
router with the switchport command, but the fa0/0 and fa 0/1 does not
understand the switchport command.
Thanks for your advice,
DT
You can't as these are layer 3 Interfaces, however they can be used to
create 802.1q trunks to other switches.
James
|
James, thanks for the info. I can then move the trunk port currently
on one port of the hwic to the fa 0/0 and then assign the vlan to that
port on the hwic.
DT |
|
| Back to top |
|
|
James
Guest
|
| Posted: Tue Jul 24, 2007 10:36 am Post subject: Re: 2811 and built-in fa / vlan |
|
|
On 24 Jul, 13:08, "dt1649...@yahoo.com" <dt1649...@yahoo.com> wrote:
| Quote: | On Jul 23, 8:35 pm, James <jdbal...@hotmail.com> wrote:
On 24 Jul, 10:18, "dt1649...@yahoo.com" <dt1649...@yahoo.com> wrote:
How do I asign a vlan to the built-in fa 0/0 or fa0/1 of the 2811 ?
Currently I can only assign VLANs to the HWIC 4FE module on this
router with the switchport command, but the fa0/0 and fa 0/1 does not
understand the switchport command.
Thanks for your advice,
DT
You can't as these are layer 3 Interfaces, however they can be used to
create 802.1q trunks to other switches.
James
James, thanks for the info. I can then move the trunk port currently
on one port of the hwic to the fa 0/0 and then assign the vlan to that
port on the hwic.
DT- Hide quoted text -
- Show quoted text -
|
I'm not 100% sure if you will be able to configure the same VLAN's on
an external switch as are on the ESW module. There was discussion
regarding this a few days ago - search for the post titled "Trouble
with 1841 and 4ESW Switch"
James |
|
| Back to top |
|
|
|
|
