Cisco 877 as a simple WLAN Client?

googlegroups@ruetsche.com · Guest

Hi group

I have a Cisco 877W and another WLAN Router with Internet
connectivity. Can i use the 877 as a simple Router between die LAN on
the other WLAN Router and the LAN on the 877?

Network A:
Subnet: 192.168.2.0/24
Cisco 877 Router without Internet (LAN: 192.168.2.1 / WLAN:
192.168.1.2)

Network B:
Subnet: 192.168.1.0/24
Other, full open WLAN Router without Encryption (LAN: 192.168.1.1)

I just want to connect the Network A to the Network B with NAT in the
Network A (to block the access for the Clients from the Network B, but
this is not a must). On the Cisco 877, there is no need that WLAN
Clients can connect to this router. On the Network A, the clients must
have the Cisco 877 LAN Address as Gateway to access to the internet.

Network A ----Wired----> Cisco877 ----Wireless---->
OtherAccessPoint ----Wired----> Network B ----Wired---->
Internet

anybody who have an example for a config like that?

thank you!

ivo

Merv · Guest

Try putting radio into universal mode (non-root):

int dot11Radio <interface>
station-role non-root